Low backlash Servo Gear Unit / Servo Gearmotor PSF/PSC/BSF Series

Products

The highest level of precision, torque and
overhung load: Low backlash planetary and helical-bevel servo gear
units
Your advantages

  • Compact, lightweight design
  • Highest permitted torques and overhung loads
  • High efficiency levels
  • Highest level of reliability, availability and durability
  • Adaptor is eliminated, which cuts costs

Planetary servo gear units
Low backlash Servo Gear Unit / Servo Gearmotor PSF/PSC/BSF Series

 

PSC
series
The
low backlash PSC planetary servo gear units are designed for the
30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed
to combine the greatest possible flexibility and cost-efficiency
because not every application requires high-performance components.
They provide a basis for diverse, dynamic and
cost-optimized drive solutions.
The
PSC planetary servo gear units are available in the following versions:
  • PSC = B5 output, smooth output shaft
  • PSKC = B5 output, with keyway
  • PSCZ = B14, output, smooth output shaft
  • PSKCZ = B14 output, with keyway

Technical data
Size
Torque class
[Nm] (lb-in)
Reduction ratios
1-stage [i]1
2-stage [i]2
220
30 (265)
3
/ 5 / 7 / 10
15 / 21 / 25 / 30 / 35 / 49 / 50 / 70 /
100
320
65 (575)
520
160 (1410)
620
320 (2830)
5 / 7 / 10
25 / 35 / 49 /
50 / 70 / 100
1) Max.
circumferential backlash: 10′ for all versions
2) Max.
circumferential backlash: 15′ for all versions
Low backlash Servo Gear Unit / Servo Gearmotor PSF/PSC/BSF Series

 

PSF
series
The
low backlash PSF planetary servo gear units are designed for the
25 to 3000 Nm (220 to 26500 lb-in) torque classes. The permitted
acceleration torques are significantly higher than these values.
Three output versions are available:
  • PSF: Solid shaft
  • PSKF: Solid shaft with key
  • PSBF: Flange block shaft in accordance with EN ISO 9409

Technical data
Type
Size
Torque class
[Nm] (lb-in)
Reduction ratios1
Circumferential backlash
1-stage
[i]
2-stage
[i]
1-stage
[i]
2-stage
[i]
PSF
120
25 (220)
3
/ 4 / 5 / 7 / 102
15 / 16 / 20 / 25 / 28 / 35 / 40 / 49 /
70 / 1003
8 / 4 / 2
10
/ 6 / 3
PSF / PSBF
220
55 (485)
6
/ 3 / 1456
8
/ 4 / 2
PSF / PSBF
320
110 (970)
PSF / PSBF
520
300 (2660)
PSF / PSBF
620
600 (5310)
4
/ 2 / 1
6
/ 3 / 1
PSF / PSBF
720
1000 (8850)
PSF / PSBF
820
1750 (15400)
PSF
920
3000 (26500)
1) Further
reduction ratios on request
2) Only PSF
3) Only PSBF 320/520, further reduction ratios on
request
4) Standard
5) Reduced
6) Minimized
Helical-bevel servo gear
units
Low backlash Servo Gear Unit / Servo Gearmotor PSF/PSC/BSF Series

 

BSF
series
The
low backlash BSF helical-bevel servo gear units are designed for
the 40 to 1500 Nm (350 to 13200 lb-in) torque classes. The permitted
acceleration torques are significantly higher than these values.
These right-angle servo gear units are available
in five output versions:
  • BSF:
    Solid shaft
  • BSKF: Solid shaft with key
  • BSBF: Flange block shaft (EN-ISO 9409)
  • BSHF: Hollow shaft with shrink disc
  • BSAF: Hollow shaft with keyway (Shaft mounted gear unit)
All versions are equipped with a B5 mounting
flange and optional foot mounting and torque arm. Because of this,
these drive units can be optimally integrated into existing applications.
The combination of a helical input stage and a hypoid output stage results
in ratio ranges which can be covered by the single-stage bevel (wheel)
and hypoid gear unit or by the single-stage helical-worm gear unit
with high transmission quality. The circumferential backlash remains
constantly low throughout the gear unit’s service life.

Technical data
Size
Torque class
[Nm] (lb-in)
Reduction
ratios
Circumferential backlash [’]
2-stage [i]
202
40 (350)
3 / 4 / 6 / 8 /
10 / 15 / 20 / 25
6 / 312
302
80 (705)
3
/ 4 / 6 / 8 / 10 / 15 / 20 / 25 / 30
402
160 (1410)
502
320 (2830)
3 / 4 / 6 / 8 /
10 / 12 / 15 / 20 / 25 / 30 / 35
602
640 (5660)
3
/ 4 / 6 / 8 / 10 / 12 / 15 / 20 / 25 / 30 / 35 / 40
802
1500 (13200)
1) Standard
2) Reduced
Motor adapter

The EPH motor adaptor for planetary servo
gear units and EBH motor adaptor for helical-bevel gear units can
be used to connect all commercial servomotors in a simple and time-efficient
manner to servo gear units from SEW-EURODRIVE.

Reduced backlash

Optional for planetary servo gear units and
helical-bevel servo gear units. The circumferential backlash of
these gear units is considerably less than that of the standard
versions so that positioning tasks can be solved with great precision.
The circumferential backlash is specified in angular minutes [ ‘]
in the technical data.

Minimized circumferential
backlash

Optional for planetary servo gear units. The
circumferential backlash of these gear units is reduced even further
than that of the reduced backlash version and therefore allows for
even greater precision when performing positioning tasks.

 
back to top