MOVIMOT^®, the gearmotor with an integrated
frequency inverter, is a tried-and-tested combination of gearmotor
and digital frequency inverter in the 0.5 to 5.4 HP power range.
Despite the integrated frequency inverter, MOVIMOT^® requires only slightly more installation
space than standard gearmotors and can, of course, be supplied
in all standard versions and mounting positions, with and without
a brake, for supply voltages of 380 to 500 V and 200 to 240 V. The
gearmotors have IP54 enclosure as standard, but the MOVIMOT^® gearmotor is also available with
IP55, IP65 and IP66 enclosures on request. This gearmotor is a heavy-duty
and compact version for a number of decentralized drive solutions.
SEW-EURODRIVE offers a SafetyDrive package for this application
to fit plants in compliance with safety category 3 of EN 954-1.

280 – 1400 (1700)

300 to 1500

3 x 380 – 500

Star

0.37 – 4.0

2.52 – 27.3

2.35 – 25.5

DRS.., DRE.., DRN..

DRE..J, DRU..J

290 – 2900

300 – 2610

3 x 380 – 500

Delta

0.55 – 4.0

0.37 – 4.0

1.81 – 13.2

1.35 – 14.6

DRS.., DRE.., DRN..

DRE..J, DRU..J

280 – 1700

3 x 200 – 240

Star-Star

0.37 – 2.2

2.08 – 12.4

DRE.., DRS..

Brake
control

BEM/BES/URM

MOVIMOT^® can be equipped with a BEM, BES or
URM brake control system as an option in conjunction with a modular
terminal box. The option is integrated in the MOVIMOT^® terminal box. BEM controls the standard
brake, BES controls the DC 24 V brake. URM is a voltage relay for
controlling brakes.

Braking
resistor

BW100… / BW200…

The
BW100…/BW200… braking resistors in IP65 enclosure convert the
MOVIMOT^® drive’s regenerative
energy of up to 100 W/200 W (0.134 hp / 0.268 hp) continuous power
into heat.

Braking
resistor

BW150… / BW068…

The
BW150…/BW068.. braking resistors in IP66 enclosure convert the
MOVIMOT^® drive’s regenerative
energy of up to 600 W/1200 W (0.805 hp /1.609 hp) continuous power
into heat.

DC 24 V  power
supply MLU11A

The optional DC
24 V power supply MLU11A is mounted in one of the MOVIMOT^® cable entry openings and allows
for operation of one MOVIMOT^® including
an option with a current consumption of up to 70 mA (MBG11A, MWA21A) without
an external 24 V auxiliary power supply.

DC 24 V power supply MLU13A

The optional integrated
DC 24 V power supply MLU13A is mounted in the MOVIMOT^® terminal box and allows for operation
of one MOVIMOT^® including an
option with a current consumption of up to 70 mA (MBG11A, MWA21A)
without an external 24V auxiliary power supply.

MLG setpoint control
module

The optional MLG..A
setpoint generator is mounted in one of the cable entry openings
of MOVIMOT^® and offers the possibility
of adjusting the input speed in the range of -100% to +100 % f_max (potentiometer f1) as well as of powering
the inverter with the DC 24 V auxiliary voltage.

MBG11A setpoint
control module

The optional MBG11A
setpoint control module has two keys and a display. MBG11A.. makes
it possible to adjust the speed remotely in the range from -100%
to +100% f_max (potentiometer f1).
Up to 31 MOVIMOT^® units can
be controlled at the same time.

MWA21A setpoint
converter

The optional MWA21A
setpoint converter converts an analog setpoint and the control signals into
an RS-485 protocol. The MWA21A enables the MOVIMOT^® to be controlled remotely from the
control cabinet. Up to 31 MOVIMOT^® units
can be controlled at the same time.

DBG60B keypad

The
DBG60B keypad can be used to control MOVIMOT^® drives
with integrated AS interface in manual mode. Furthermore, important
information can be displayed in monitor mode.

The DBG60B keypad is connected to the diagnostic
interface in the MOVIMOT^® terminal box.

MDG11A diagnostic
unit

The optional MDG11A
diagnostic unit indicates the operating status, output current,
terminal status and MOVIMOT^® fault
codes when faults occur.

MNF11A line filter

The MNF11A integrated
line filter option is mounted in the MOVIMOT^® terminal
box and allows for a drive system that complies with the emitted
interference stipulated in EN 61800-3 as well as with the class
B limit according to EN 55011 and EN 55014.

P2.A mount for
mounting near motor

The P2.A mounting
plate option allows the MOVIMOT^® inverter
to be mounted away from the motor (offset). The inverter is connected
to the motor using a pre-fabricated hybrid cable. MOVIMOT^® with option P2.A is supplied in enclosure
IP65.